الفهرس 
Solar energyOnly 14 pages are availabe for public view
 |  | from | 91 |  |  |
| | | from | 91 | | |
Abstract
Cooling photovoltaic panels (PV) is considered as one of the most important ways to enhance its performance. Photons with wavelength above the threshold are converted into heat in the PV cells. The ambient temperature acts a key base in the photovoltaic conversion process, where it output power decreases with increasing its temperature than the ambient temperature. In this study, experiments are conducted to study the cooling effect of using a porous material on the electrical performance of a photovoltaic panel. The temperature of the surface of the PV panel is measured at the thirty-eight points without cooling and with cooling. It is found that the temperature decreases when compared to PV panel without cooling. The maximum decrease in the temperature is 9.8%. In addition, the electric current of the PV increases with cooling. The maximum increase of the cooling measured electric current is 16.4 % at a specific voltage, 19.6V. Furthermore, the maximum gain of the output power is about 15 %.
Moreover, a numerical work is carried out by ANSYS program on the thermal side. The results of the ANSYS program proved that the holes porous aluminum sheets achieved the cooling for the PV panel.